Полное руководство по замене тормозной жидкости
Admin·30 июля 2026 г.·Блог
Brake System · Maintenance
Complete Brake Fluid
Replacement Guide
Interval, Specs & Step‑by‑Step Process
Brake fluid is highly hygroscopic – it absorbs moisture over time. Contaminated fluid has a lower boiling point, which can cause vapor lock at high temperatures and lead to brake failure. Regular replacement is non‑negotiable.
📋 Interval & Specification
📅 Replacement Interval
Every 2 years or 20,000 km
(standard)
In humid/rainy regions, shorten to 1.5 years.
In humid/rainy regions, shorten to 1.5 years.
🧪 Fluid Specification
DOT4
— Commuter / small‑displacement
DOT5.1 — Performance / aggressive riding
⚠️ DOT5 silicone‑based — NOT compatible
DOT5.1 — Performance / aggressive riding
⚠️ DOT5 silicone‑based — NOT compatible
🔧 Replacement Process
1. Drain old fluid
→
2. Clean reservoir
→
3. Fill with new fluid
→
4. Bleed section by section
→
5. Top up to correct level
→
6. Wipe away spills
→
7. Low‑speed test ride
💡 Bleeding reminder: Pull lever → hold → open bleed nipple → close nipple → release lever. Repeat until fluid runs clear and bubble‑free. Never let the reservoir run dry during bleeding.
Fresh brake fluid = firm lever, consistent bite, and safe stops. Replace it on schedule, and your brakes will always be ready when you need them most.